2 closed and 2 mirrored
Front-right and rear-left take the closed one; front-left and rear-right, the mirrored one. The 3MF already has each one on its arm.
LAYER0 / 0
Z0.00 mm
Downloading meshes · 0%
Drag to rotate · Ctrl + scroll to zoom · double-click a part
- Claws
- 4 × TPU
- Motor opening
- Ø33 mm
- Dragon
- 106 mm
- Dragon mount
- 4 × M3
- Claw plate
- 9.1 h · 72 g
- Dragon, 1 color
- 2.6 h · 15 g
Overview
Claws on the motors.
A dragon on its back.
The claws replace the Evoque's stock arm guards, under the motors. The fit was measured from the original guard: the 6 mm arm slides in sideways into the cavity, flexing the TPU, and the motor goes back through the 33 mm opening with the same screws.
Each claw locks with a dovetail latch: a tab on the right-hand piece that rides in a blind groove, open only from the inside. Once mounted on the motor, it has nowhere to go.
- Full mirrored pair, with the rear legs swapped
- Only the dragon figure is scaled: the stock mount keeps its 4 M3 holes
- Reptilian eyes to glue on, or as an eyes-only AMS project
motor opening
The 29 mm motor passes with room to spare; the cage never touches the bell.
wingspan
A standing dragon on the fin's stock mount.
latch clearance
0.3 on the vertical faces and 0.5 on the diagonals, which lie flat during printing.
The 4 legs
Each claw on its arm
Viewed from above, with the drone's nose pointing up. Click a leg to see it in 3D. If you work with the drone belly-up, its right side is on your left.
Specs
Spec sheet
Printing
Slicer numbers
Times and grams from the Bambu Studio projects for the P1S, included in the download.
Files
What's in the download
Click a claw or dragon file to see the part in 3D.
Testing
What's been printed
The real state of testing. Items on the right move to the left as they come off the printer.
Already printed
Not tested yet
No reviews yetPrinted the claws or the dragon? Send us a photo and get 15% off your next STL with coupon VOA15.
FAQ